 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NLSV4T240 4-Bit Dual-Supply Inverting Level Translator The NLSV4T240 is a 4-bit configurable dual-supply voltage level translator. The input An and output Bn ports are designed to track two different power supply rails, VCCA and VCCB respectively. Both supply rails are configurable from 0.9 V to 4.5 V allowing universal low-voltage translation from the input An to the output Bn port. Features http://onsemi.com MARKING DIAGRAM 1 UQFN12 MU SUFFIX CASE 523AE WBM G * * * * * * * * * Wide VCCA and VCCB Operating Range: 0.9 V to 4.5 V High-Speed w/ Balanced Propagation Delay Inputs and Outputs have OVT Protection to 4.5 V Non-preferential VCCA and VCCB Sequencing Outputs at 3-State until Active VCC is Reached Power-Off Protection Outputs Switch to 3-State with VCCB at GND Ultra-Small Packaging: 1.7 mm x 2.0 mm UQFN12 This is a Pb-Free Device WB = Specific Device Code M = Date Code G = Pb-Free Package PIN ASSIGNMENT OE VCCA A1 A2 A3 A4 1 2 3 4 5 6 12 11 10 9 8 7 Typical Applications * Mobile Phones, PDAs, Other Portable Devices Important Information VCCB B1 B2 B3 B4 * ESD Protection for All Pins: HBM (Human Body Model) > 6000 V VCCA A1 VCCB B1 GND (Top View) A2 B2 ORDERING INFORMATION Device Package Shipping A3 B3 NLSV4T240MUTAG UQFN12 3000/Tape & Reel (Pb-Free) A4 B4 For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. OE Figure 1. Logic Diagram (c) Semiconductor Components Industries, LLC, 2007 1 July, 2007 - Rev. 0 Publication Order Number: NLSV4T240/D NLSV4T240 PIN ASSIGNMENT PIN VCCA VCCB GND An Bn OE FUNCTION Input Port DC Power Supply Output Port DC Power Supply Ground Input Port Output Port Output Enable OE L L H TRUTH TABLE Inputs An L H X Outputs Bn H L 3-State MAXIMUM RATINGS Symbol VCCA, VCCB VI VC VO DC Supply Voltage DC Input Voltage Control Input DC Output Voltage (Power Down) (Active Mode) (Tri-State Mode) IIK IOK IO ICCA, ICCB IGND TSTG DC Input Diode Current DC Output Diode Current DC Output Source/Sink Current DC Supply Current Per Supply Pin DC Ground Current per Ground Pin Storage Temperature An OE Bn Bn Bn Rating Value -0.5 to +5.5 -0.5 to +5.5 -0.5 to +5.5 -0.5 to +5.5 -0.5 to +5.5 -0.5 to +5.5 -20 -50 50 100 100 -65 to +150 VI < GND VO < GND VCCA = VCCB = 0 Condition Unit V V V V V V mA mA mA mA mA C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. RECOMMENDED OPERATING CONDITIONS Symbol VCCA, VCCB VI VC VIO Positive DC Supply Voltage Bus Input Voltage Control Input Bus Output Voltage (Power Down Mode) (Active Mode) (Tri-State Mode) TA Dt / DV Operating Temperature Range Input Transition Rise or Rate VI, from 30% to 70% of VCC; VCC = 3.3 V 0.3 V OE Bn Bn Bn Parameter Min 0.9 GND GND GND GND GND -40 0 Max 4.5 4.5 4.5 4.5 VCCB 4.5 +85 10 Unit V V V V V V C nS http://onsemi.com 2 NLSV4T240 DC ELECTRICAL CHARACTERISTICS -405C to +855C Symbol VIH Parameter Input HIGH Voltage (An, OE) Test Conditions VCCA (V) 3.6 - 4.5 2.7 - 3.6 2.3 - 2.7 1.4 - 2.3 0.9 - 1.4 VIL Input LOW Voltage (An, OE) 3.6 - 4.5 2.7 - 3.6 2.3 - 2.7 1.4 - 2.3 0.9 - 1.4 VOH Output HIGH Voltage IOH = -100 mA; VI = VIH IOH = -0.5 mA; VI = VIH IOH = -2 mA; VI = VIH IOH = -6 mA; VI = VIH 0.9 - 4.5 0.9 1.4 1.65 2.3 IOH = -12 mA; VI = VIH 2.3 2.7 IOH = -18 mA; VI = VIH 2.3 3.0 IOH = -24 mA; VI = VIH VOL Output LOW Voltage IOL = 100 mA; VI = VIL IOL = 0.5 mA; VI = VIH IOL = 2 mA; VI = VIH IOL = 6 mA; VI = VIL IOL = 12 mA; VI = VIL 3.0 0.9 - 4.5 1.1 1.4 1.65 2.3 2.7 IOL = 18 mA; VI = VIL 2.3 3.0 IOL = 24 mA; VI = VIL II IOFF ICCA ICCB Input Leakage Current Power-Off Leakage Current Quiescent Supply Current Quiescent Supply Current VI = VCCA or GND OE = 0 V VI = VCCA or GND; IO = 0, VCCA = VCCB VI = VCCA or GND; IO = 0, VCCA = VCCB VI = VCCA or GND; IO = 0, VCCA = VCCB VI = VCCA - 0.6 V; VI = VCCA or GND VI = VCCA - 0.6 V; VI = VCCA or GND TA = 25C, OE = 0 V 3.0 0.9 - 4.5 0 0.9 - 4.5 0.9 - 4.5 0.9 - 4.5 0.9 - 4.5 4.5 3.6 4.5 3.6 0.9 - 4.5 0.9 - 4.5 0.9 1.4 1.65 2.3 2.3 2.7 2.3 3.0 3.0 0.9 - 4.5 1.1 1.4 1.65 2.3 2.7 2.3 3.0 3.0 0.9 - 4.5 0.9 - 4.5 0 0.9 - 4.5 0.9 - 4.5 0.9 - 4.5 4.5 3.6 4.5 3.6 0.9 - 4.5 0.9 - 4.5 VCCB (V) 0.9 - 4.5 Min 2.2 2.0 1.6 0.65 * VCCA 0.9 * VCCA VCCB - 0.2 0.75 * VCCB 1.05 1.25 2.0 1.8 2.2 1.7 2.4 2.2 -1.0 -1.0 -1.0 -1.0 Max 0.8 0.8 0.7 0.35 * VCCA 0.1 * VCCA 0.2 0.3 0.35 0.3 0.4 0.4 0.6 0.4 0.55 1.0 1.0 1.0 2.0 2.0 4.0 10 5.0 10 5.0 1.0 mA mA mA mA mA mA mA mA V V V Unit V ICCA + ICCB Quiescent Supply Current DICCA DICCB IOZ Increase in ICC per Input Voltage, Other Inputs at VCCA or GND Increase in ICC per Input Voltage, Other Inputs at VCCA or GND I/O Tri-State Output Leakage Current http://onsemi.com 3 NLSV4T240 TOTAL STATIC POWER CONSUMPTION (ICCA + ICCB) -405C to +855C VCCB (V) 4.5 VCCA (V) 4.5 3.3 2.8 1.8 0.9 Min Max 2 2 <2 <1 < 0.5 Min 3.3 Max 2 2 <1 <1 < 0.5 Min 2.8 Max 2 2 <1 < 0.5 < 0.5 Min 1.8 Max 2 2 < 0.5 < 0.5 < 0.5 Min 0.9 Max < 1.5 < 1.5 < 0.5 < 0.5 < 0.5 Unit A A A A A NOTE: Connect ground before applying supply voltage VCCA or VCCB. This device is designed with the feature that the power-up sequence of VCCA and VCCB will not damage the IC. AC ELECTRICAL CHARACTERISTICS -405C to +855C VCCB (V) 4.5 Symbol tPLH, tPHL (Note 1) 3.3 Max 1.6 1.7 1.9 2.1 2.4 2.6 3.7 3.9 4.1 4.4 2.6 3.7 3.9 4.1 4.4 0.15 0.15 0.15 0.15 0.15 Min Max 1.8 1.9 2.1 2.4 2.7 3.8 3.9 4.1 4.4 4.7 3.8 3.9 4.1 4.4 4.7 0.15 0.15 0.15 0.15 0.15 Min 2.8 Max 2.0 2.1 2.3 2.5 2.8 4.0 4.1 4.3 4.5 4.8 4.0 4.1 4.3 4.5 4.8 0.15 0.15 0.15 0.15 0.15 Min 1.8 Max 2.1 2.3 2.5 2.7 3.0 4.1 4.3 4.5 4.7 5.0 4.1 4.3 4.5 4.7 5.0 0.15 0.15 0.15 0.15 0.15 Min 1.2 Max 2.3 2.6 2.8 3.0 3.3 4.3 4.6 4.8 5.0 5.3 4.3 4.6 4.8 5.0 5.3 0.15 0.15 0.15 0.15 0.15 nS nS nS Unit nS Parameter Propagation Delay, An to Bn VCCA (V) 4.5 3.3 2.8 1.8 1.2 Min tPZH, tPZL (Note 1) Output Enable, OE to Bn 4.5 3.3 2.5 1.8 1.2 tPHZ, tPLZ (Note 1) Output Disable, OE to Bn 4.5 3.3 2.5 1.8 1.2 tOSHL, tOSLH (Note 1) Output to Output Skew, Time 4.5 3.3 2.5 1.8 1.2 1. Propagation delays defined per Figure 2. CAPACITANCE Symbol CIN CI/O CPD Parameter Control Pin Input Capacitance I/O Pin Input Capacitance Power Dissipation Capacitance Test Conditions VCCA = VCCB = 3.3 V, VI = 0 V or VCCA/B VCCA = VCCB = 3.3 V, VI = 0 V or VCCA/B VCCA = VCCB = 3.3 V, VI = 0 V or VCCA, f = 10 MHz Typ (Note 2) 3.5 5.0 20 Unit pF pF pF 2. Typical values are at TA = +25C. 3. CPD is defined as the value of the IC's equivalent capacitance from which the operating current can be calculated from: ICC(operating) ^ CPD x VCC x fIN x NSW where ICC = ICCA + ICCB and NSW = total number of outputs switching. http://onsemi.com 4 NLSV4T240 VCC VCCO x 2 OPEN GND Pulse Generator RL DUT CL RL Figure 2. AC (Propagation Delay) Test Circuit Test tPLH, tPHL tPLZ, tPZL tPHZ, tPZH CL = 15 pF or equivalent (includes probe and jig capacitance) RL = 2 kW or equivalent ZOUT of pulse generator = 50 W VIH Input (An) Vm tPLH Output (Bn) Vm Vm 0V tPHL Vm VOL Waveform 1 - Propagation Delays tR = tF = 2.0 ns, 10% to 90%; f = 1 MHz; tW = 500 ns VIH OEn tPZH Output (Bn) tPZL Output (Bn) Vm VX VOL Waveform 2 - Output Enable and Disable Times tR = tF = 2.0 ns, 10% to 90%; f = 1 MHz; tW = 500 ns Vm tPLZ Vm tPHZ Vm 0V VOH VY 0V VCC VOH Switch OPEN VCCO x 2 GND Figure 3. AC (Propagation Delay) Test Circuit Waveforms VCC Symbol VmA VmB VX VY 3.0 V - 4.5 V VCCA/2 VCCB/2 VOL x 0.1 VOH x 0.9 2.3 V - 2.7 V VCCA/2 VCCB/2 VOL x 0.1 VOH x 0.9 1.65 V - 1.95 V VCCA/2 VCCB/2 VOL x 0.1 VOH x 0.9 1.4 V - 1.6 V VCCA/2 VCCB/2 VOL x 0.1 VOH x 0.9 0.9 V - 1.3 V VCCA/2 VCCB/2 VOL x 0.1 VOH x 0.9 http://onsemi.com 5 NLSV4T240 PACKAGE DIMENSIONS UQFN12 1.7x2.0, 0.4P CASE 523AE-01 ISSUE A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 MM FROM TERMINAL TIP. 4. MOLD FLASH ALLOWED ON TERMINALS ALONG EDGE OF PACKAGE. FLASH 0.03 MAX ON BOTTOM SURFACE OF TERMINALS. 5. DETAIL A SHOWS OPTIONAL CONSTRUCTION FOR TERMINALS. DIM A A1 A3 b D E e K L L1 L2 MILLIMETERS MIN MAX 0.45 0.55 0.00 0.05 0.127 REF 0.15 0.25 1.70 BSC 2.00 BSC 0.40 BSC 0.20 ---0.45 0.55 0.00 0.03 0.15 REF D AB L1 2X 0.10 C 0.10 C 2X 0.05 C 12X 0.05 C A3 8X K 5 7 DETAIL A 1 12X L L2 BOTTOM VIEW ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative EE EE TOP VIEW A A1 SIDE VIEW e 11 PIN 1 REFERENCE DETAIL A E NOTE 5 DETAIL B DETAIL B OPTIONAL CONSTRUCTION C SEATING PLANE MOUNTING FOOTPRINT SOLDERMASK DEFINED 2.00 12X b 0.10 0.05 M M CAB C NOTE 3 1 0.32 2.30 11X 0.40 PITCH 0.22 12X 0.69 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 6 NLSV4T240/D |
Price & Availability of NLSV4T240
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |